Cargo transfer 2021-06-20 21:32:21 LTL freight shuttle bus must depart strictly on time and drive according to the specified route. At the transfer station, the duty officer must apply for a visa on the road bill. The goods that need to be transferred need to be transported to the specified transfer station in the form of a transfer LTL shuttle bus or a LTL shuttle bus along the way. The transfer operation is mainly to unload the less-than-carload cargo that still needs to be transported from all directions, then reassemble it for transport, and continue to transport it to the terminal. There are three basic methods for LTL cargo transfer operations. 1. Landing method Landing method is to unload all the less-than-carload goods on the arriving vehicle into the warehouse, reassemble them according to the direction or on the arrival station, and then reassemble them. This method is simple and easy to implement, and the vehicle load capacity is better utilized, but the loading and unloading operations are large, the operation speed is slow, and the warehouse and venue occupy a large area. 2. By car The car is about to arrive on the vehicle and transport it to the same destination in front, and the part of the core cargo that has a large number of transfers or is difficult to unload is left on the vehicle. After unloading the rest of the goods, add other goods from the same destination. In this method, the core cargo does not need to be unloaded, which reduces the amount of loading and unloading operations and speeds up the transfer operation. The Guangzhou-Ningbo logistics line saves loading and unloading labor and cargo space, but it is not easy to check the loading and unloading status and quantity of the core cargo left on the car. Inventory, it is inevitable that additional operations such as unloading and inversion will occur when there are a lot of additional goods. 3. Vehicle passing method When several LTL trucks arrive at the station at the same time for transfer operations, part of the transfer cargo in the vehicle is directly transferred from one vehicle to another. When organizing a passing car, you can either go to the empty car or go to the heavy car with the core cargo. This method completes the loading operation at the same time as the unloading operation is completed, reduces the amount of loading and unloading operations for less-than-carload goods, improves the operation efficiency, and accelerates the transfer speed, but it has high requirements for the time connection of the arrival vehicle and is prone to accidental factors. Interference. In addition to the storage of the goods, the LTL cargo transfer station also needs to carry out some operations related to the transfer link, such as tally, stacking, sorting, and reloading. Therefore, the transfer station should be equipped with a certain warehouse or cargo shed and other arrival facilities. . The warehouse or shed for less-than-carload goods should have good ventilation, moisture-proof, fire-proof, lighting, lighting and other conditions to ensure the integrity of the goods and meet the needs of various operations. LTL cargo transfer operations are sorted and sorted according to the flow of goods or arrivals, and the process is concentrated and then dispersed. The choice of transfer stations must be based on sufficient transportation economic investigations, combined with the characteristics of the source and flow of goods, and the hardware of the transfer station The requirements for facilities and warehouses are the same. You can follow any RSS 2.0 replies to this content through the feed.